Friday, January 26, 2018

The "Show Rarities" box

As an eBird reviewer, I am continually surprised how few eBirders know about the "Show Rarities" box.  Except for those few eBirders that look only at the birds at their feeders and who never host (knowingly or otherwise) a local rarity at those feeders, all eBirders will eventually run across something that is considered locally rare.  That is, the entry gets flagged by the relevant eBird filter.  This is particularly true for those folks that don't eBird regularly, but occasionally chase interesting stakeouts, such as this year's crop of Snowy Owls.

The result of this ignorance of a basic part of eBird's infrastructure is that such observers usually wind up putting an entry for the chased Snowy Owl, or Red-breasted Sapsucker, or Brambling into one or another of the various "spuh" categories.  In fact, this winter's Snowy Owl movement is really obvious anytime that I go to look at the photos entered into the "owl sp." entry, because the observer did not know about the "Show Rarities" box.  Since the eBird program is very light on instruction as to how to use eBird and a lot of people hate "reading the manual," it is left to reviewers to explain to observers (or, in many cases, not) how to get those various rarities into the species entry, rather than letting them languish in an unidentified category (which serves almost no one well).

To find the "Show Rarities" box, one must be in the process of submitting a checklist directly via the Internet (that is, NOT via the eBird app) OR be editing an existing checklist (which one cannot do from the eBird app; at least, not yet).  The "Show Rarities" box is on the right side of the checklist-view page, as indicated here (click on images to see larger versions).  However, to get to the checklist-view page, you will have had to click on the "Edit Species List" button immediately after you opened the relevant checklist (Fig. 1).

Figure 1. This is the page that you see when you open an existing checklist (that is, one that you are not currently entering originally). The arrow points out the button on which to click to get to the checklist-view page (Fig. 2).



Figure 2. The "Show Rarities" box is shown by the arrow.

If the entry for which you are looking is not presented in the checklist, look at that check box in front of "Show Rarities" to make sure that it is checked (it is not checked in the above graphic).  If that box is unchecked, simply click on the box and the check-mark will be added.

However, if that check-box is already clicked and the entry for which you search is still not present, look above the "Show Rarities" box for the "Add species" feature.  Clicking on "Add Species" will open a dialog box that will allow you to enter the entry for which you search, whether that is "Picoides sp.," "Wandering Albatross,", or, as in Fig. 3, "Great Gray Owl."



Figure 3. Once the "Add species" dialog box opens, simply start typing in the name of the entry.

In the example provided in Fig. 3, I have started typing "Great Gray Owl" and have not gotten to the owl part, but the option that I want is the first one on the list. Simply highlight that option (here, it is in blue) and click on it to move that option into the dialog box.  Once that ation is completed, eBird will give you the screen presented in Fig. 4.


Figure 4. After filling in the dialog box in the previous step, this screen is the result.

Notice that eBird has filled in the number box, assuming that an observation that requires adding a species to the checklists -- that is, one that is not even on the relevant filter, would be rare enough that the likelihood of seeing more than one is low.  If, however, one does wish to report more than one, simply highlight the number (or put the cursor to the right of the number and press the 'backspace' key) and type in the number that you wish to report.  Then, because this entry is considered locally rare, you will need to provide details in the "Details" box.  Of course, if you're simply trying to add an unidentified category (one of the "... sp." entries, called "spuhs" by eBird folks), then you'll need to just add a short note in the "Details" box as to why you're using it, and that that entry might need to be added to the relevant filter.  Once you have completed those steps, simply click on the big, green "Save" button, and you can continue on your merry way.

Wednesday, January 24, 2018

The "Change Species" button

For most of eBird's history, if one made a mistake and entered data in the wrong entry, to fix it, one needed to put all of the relevant information (number of individuals and any data on age/sex, etc.) into the intended entry and then delete the mistaken entry.  This was a bit annoying, but particularly so if one had uploaded photos into that entry.  One might have lost track of those photos, but even if one hadn't, just finding them and re-uploading was another minor pain.

Late in 2017, eBird introduced a great new checklist-editing tool: the "Change Species" button.  This new button allows quick-and-easy transfer of data and embedded media from one entry to another, as long as there are not already data in the target species entry.  This post is meant as a how-to essay on the mechanics of using the "Change Species" button.

After opening the checklist in question, click on the "Edit Species List" button (click on images to see larger versions):


After clicking on that button, eBird will then provide you access to the various entries in the bird list:


In the above screen grab, we can see that I have entered the number of birds and a photo into the "longspur sp." entry, an entry that I had used as a place-holder until I could go through my photos and figure out a reasonable ratio of the longspur species present (Lapland and McCown's).  So, now that I've done that, I can move the data AND the photo into the McCown's Longspur entry very easily by clicking on the "Change Species" button visible to the right of the species/category name.  [If you want to move only the media, click on the "Only my media" radial button.]  Once I click that button, I see this:


Since I want to move the number of individuals AND any other data or photos, I make sure that the "Entire observation" radial button is highlighted (rather than the "Only my media" radial button).  Then I start typing into the blue ovaled box under "Change species identification to" the name of the species into which entry I wish to move the information.  Once I start typing in the name, eBird starts giving me options that match the set of letters typed to that point.  Because there is only one bird species in the world named after Mr. McCown, once I've gotten that far, that species is the only one offered:


However, for other species, you may have a couple to many options for species, depending upon how far into the name you've typed.  You can scroll down the list and highlight the entry that you want and click on it, which will then show in that ovaled box:


Then, make sure that everything presented is correct and, if so, click on the green "Change" button, which will give you this screen:


Then, go through the checklist and make sure that everything is copasetic (or hunky-dory or the way that you want it) and click on the big, green "Save" button.

You're done.  The process actually takes much less time than does reading this blog post.